APRS.ro MAP

Reset

reset

SR9NSK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-5. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1737226623	79 Pkt	3 Pkt	0 Pkt	27 DegC
1737226020	62 Pkt	2 Pkt	0 Pkt	27 DegC
1737225420	140 Pkt	3 Pkt	0 Pkt	27 DegC
1737224218	59 Pkt	4 Pkt	0 Pkt	27 DegC
1737223616	95 Pkt	2 Pkt	0 Pkt	27 DegC
1737223015	127 Pkt	4 Pkt	1 Pkt	27 DegC
1737222413	134 Pkt	2 Pkt	0 Pkt	27 DegC
1737221813	68 Pkt	3 Pkt	0 Pkt	27 DegC
1737221211	115 Pkt	2 Pkt	0 Pkt	27 DegC
1737220611	135 Pkt	4 Pkt	0 Pkt	27 DegC
1737220006	127 Pkt	2 Pkt	0 Pkt	27 DegC
1737219406	117 Pkt	3 Pkt	0 Pkt	27 DegC
1737218804	118 Pkt	6 Pkt	0 Pkt	27 DegC
1737218194	101 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737217592	84 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737216992	80 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737216390	120 Pkt	2 Pkt	0 Pkt	27.5 DegC
1737215790	122 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737215187	125 Pkt	14 Pkt	12 Pkt	27.5 DegC
1737214587	132 Pkt	7 Pkt	4 Pkt	27.5 DegC
1737213986	119 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737213383	147 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737212780	146 Pkt	2 Pkt	0 Pkt	27.5 DegC
1737212180	127 Pkt	3 Pkt	0 Pkt	27.5 DegC
1737211579	82 Pkt	2 Pkt	0 Pkt	27.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)