This is the latest recevied telemetry packets stored in our database for station/object S55UJE-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Uacu* | Iacu* | Temp* | Rx1h* | WIND* |
---|---|---|---|---|---|
1737229413 | 12.5 Volt | -1.58 A | -6 C | 740 Pkt | 0 m/s |
1737229113 | 12.5 Volt | -1.58 A | -5.5 C | 740 Pkt | 0 m/s |
1737228812 | 12.5 Volt | -1.58 A | -5.5 C | 750 Pkt | 0 m/s |
1737228512 | 12.5 Volt | -1.58 A | -5 C | 750 Pkt | 0 m/s |
1737228212 | 12.5 Volt | -1.58 A | -5 C | 760 Pkt | 0 m/s |
1737227911 | 12.5 Volt | -1.58 A | -4.5 C | 750 Pkt | 0 m/s |
1737227611 | 12.5 Volt | -1.58 A | -4 C | 760 Pkt | 0 m/s |
1737227311 | 12.5 Volt | -1.58 A | -3.5 C | 750 Pkt | 0 m/s |
1737227011 | 12.5 Volt | -1.78 A | -3 C | 750 Pkt | 0 m/s |
1737226710 | 12.5 Volt | -1.58 A | -2.5 C | 750 Pkt | 0 m/s |
1737226410 | 12.6 Volt | -1.58 A | -1.5 C | 760 Pkt | 0 m/s |
1737226110 | 12.6 Volt | -1.58 A | -1 C | 750 Pkt | 0 m/s |
1737225809 | 12.6 Volt | -1.58 A | 0 C | 740 Pkt | 0 m/s |
1737225509 | 12.6 Volt | -1.58 A | 0 C | 740 Pkt | 0 m/s |
1737225209 | 12.6 Volt | -1.58 A | 0.5 C | 730 Pkt | 0 m/s |
1737224908 | 12.6 Volt | -1.58 A | 1 C | 730 Pkt | 0 m/s |
1737224608 | 12.6 Volt | -1.58 A | 1.5 C | 730 Pkt | 0 m/s |
1737224308 | 12.6 Volt | -1.58 A | 2.5 C | 740 Pkt | 0 m/s |
1737224008 | 12.6 Volt | -1.58 A | 3 C | 720 Pkt | 0 m/s |
1737223707 | 12.6 Volt | -1.58 A | 3.5 C | 730 Pkt | 0 m/s |
1737223407 | 12.6 Volt | -1.58 A | 4 C | 720 Pkt | 0 m/s |
1737223107 | 12.6 Volt | -1.58 A | 5 C | 710 Pkt | 0 m/s |
1737222807 | 12.6 Volt | -1.58 A | 6 C | 720 Pkt | 0 m/s |
1737222506 | 12.6 Volt | -1.58 A | 7 C | 730 Pkt | 0 m/s |
1737222207 | 12.6 Volt | -1.58 A | 7.5 C | 730 Pkt | 0 m/s |
*Used Equation Coefficients:
Uacu: 0, 0.1, 0
Iacu: 0, 0.1935, -24.9984
Temp: 0, 0.5, -64
Rx1h: 0, 10, 0
WIND: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)