APRS.ro MAP

Reset

reset

IR2UEZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UEZ. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1737277410	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737277110	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737276810	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737276509	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737276209	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737275909	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737275608	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737275308	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737275008	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737274708	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737274407	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737274107	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737273807	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737273506	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737273206	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737272906	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737272606	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737272305	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737272005	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737271705	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737271404	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737271104	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737270804	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737270504	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1737270203	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)