This is the latest recevied telemetry packets stored in our database for station/object ED7YAX-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VAPRS* | VREPE* | Carga* | Trepe* | Taprs* |
---|---|---|---|---|---|
1737256265 | 14.5 Volt | 0 Volt | 19.5 mA | 12 C | 12 C |
1737255965 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737255665 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737255365 | 14.5 Volt | 0 Volt | 19.5 mA | 12 C | 12 C |
1737255065 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737254765 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737254465 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737254165 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737253865 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737253565 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737253265 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737252965 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737252665 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737252365 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12 C |
1737252065 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737251765 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12.5 C |
1737251465 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12.5 C |
1737251165 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737250865 | 14.5 Volt | 0 Volt | 19.5 mA | 12.5 C | 12.5 C |
1737250565 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737250265 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737249965 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737249665 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737249365 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
1737249065 | 14.5 Volt | 0 Volt | 19.5 mA | 13 C | 12.5 C |
*Used Equation Coefficients:
VAPRS: 0, 0.074, 0
VREPE: 0, 0.074, 0
Carga: 0, 19.5, -2496
Trepe: 0, 0.5, -64
Taprs: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)