APRS.ro MAP

Reset

reset

IK2CHZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2CHZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Dg10m*
1737267121	13.8 Volt	160 Pkt	19 Pcnt	2 Pkt
1737266521	13.73 Volt	160 Pkt	18 Pcnt	0 Pkt
1737265921	13.73 Volt	160 Pkt	18 Pcnt	0 Pkt
1737265321	13.73 Volt	160 Pkt	18 Pcnt	0 Pkt
1737264721	13.73 Volt	160 Pkt	17 Pcnt	0 Pkt
1737264121	13.8 Volt	160 Pkt	18 Pcnt	0 Pkt
1737263521	13.73 Volt	160 Pkt	18 Pcnt	0 Pkt
1737262921	13.8 Volt	160 Pkt	18 Pcnt	0 Pkt
1737262321	13.73 Volt	160 Pkt	19 Pcnt	0 Pkt
1737261721	13.8 Volt	170 Pkt	19 Pcnt	0 Pkt
1737261121	13.8 Volt	170 Pkt	19 Pcnt	0 Pkt
1737260521	13.73 Volt	170 Pkt	19 Pcnt	0 Pkt
1737259921	13.8 Volt	170 Pkt	19 Pcnt	0 Pkt
1737259321	13.8 Volt	170 Pkt	19 Pcnt	0 Pkt
1737258721	13.8 Volt	180 Pkt	19 Pcnt	0 Pkt
1737258121	13.8 Volt	190 Pkt	19 Pcnt	0 Pkt
1737257521	13.8 Volt	200 Pkt	21 Pcnt	0 Pkt
1737256921	13.8 Volt	210 Pkt	22 Pcnt	0 Pkt
1737256321	13.8 Volt	220 Pkt	23 Pcnt	0 Pkt
1737255721	13.8 Volt	240 Pkt	25 Pcnt	0 Pkt
1737255121	13.73 Volt	260 Pkt	27 Pcnt	0 Pkt
1737254521	13.8 Volt	260 Pkt	28 Pcnt	0 Pkt
1737253921	13.73 Volt	270 Pkt	29 Pcnt	0 Pkt
1737253322	13.8 Volt	280 Pkt	29 Pcnt	0 Pkt
1737252722	13.8 Volt	290 Pkt	30 Pcnt	0 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)