APRS.ro MAP

Reset

reset

EA3GKP-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA3GKP-8. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	VBAT*
1737278229	-32 dbm	2.85 V
1737277929	-36 dbm	2.88 V
1737277630	-37 dbm	2.9 V
1737277329	-32 dbm	2.86 V
1737277030	-23 dbm	2.88 V
1737276729	-35 dbm	2.9 V
1737276430	-37 dbm	2.89 V
1737276129	-33 dbm	2.9 V
1737275830	-25 dbm	2.91 V
1737275529	-34 dbm	2.9 V
1737275229	-35 dbm	2.89 V
1737274929	-36 dbm	2.9 V
1737274629	-35 dbm	2.86 V
1737274329	-35 dbm	2.88 V
1737274029	-31 dbm	2.88 V
1737273729	-34 dbm	2.9 V
1737273429	-25 dbm	2.88 V
1737273129	-37 dbm	2.91 V
1737272829	-30 dbm	2.89 V
1737272529	-35 dbm	2.87 V
1737272229	-36 dbm	2.89 V
1737271929	-33 dbm	2.87 V
1737271629	-34 dbm	2.89 V
1737271329	-35 dbm	2.9 V
1737271029	-36 dbm	2.89 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)