This is the latest recevied telemetry packets stored in our database for station/object DC5WT-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737224085 | 0.1 deg C | 75.2 % | 1030.8 hPa | 0 | 0 |
| 1737223185 | 0.3 deg C | 74.5 % | 1030.8 hPa | 0 | 0 |
| 1737222285 | 0.6 deg C | 74.2 % | 1030.8 hPa | 0 | 0 |
| 1737221385 | 1.1 deg C | 72.4 % | 1030.7 hPa | 0 | 0 |
| 1737220485 | 1.5 deg C | 71.6 % | 1030.7 hPa | 0 | 0 |
| 1737219585 | 1.8 deg C | 71.6 % | 1030.7 hPa | 0 | 0 |
| 1737218685 | 2.5 deg C | 69.3 % | 1030.5 hPa | 0 | 0 |
| 1737217785 | 3.2 deg C | 68.5 % | 1030.5 hPa | 0 | 0 |
| 1737217756 | 3.2 deg C | 68.4 % | 1030.5 hPa | 0 | 0 |
| 1737216855 | 3.9 deg C | 67.5 % | 1030.5 hPa | 0 | 0 |
| 1737215955 | 4.6 deg C | 66.2 % | 1030.3 hPa | 0 | 0 |
| 1737215055 | 6.1 deg C | 63 % | 1030.2 hPa | 0 | 0 |
| 1737214155 | 7.1 deg C | 61 % | 1030.1 hPa | 0 | 0 |
| 1737213255 | 8.4 deg C | 59.3 % | 1030 hPa | 0 | 0 |
| 1737212355 | 9.4 deg C | 59 % | 1030 hPa | 0 | 0 |
| 1737211455 | 10.3 deg C | 58.1 % | 1029.9 hPa | 0 | 0 |
| 1737210555 | 11.3 deg C | 55.5 % | 1029.8 hPa | 0 | 0 |
| 1737209655 | 11.5 deg C | 53.5 % | 1029.6 hPa | 0 | 0 |
| 1737208755 | 11.8 deg C | 54.9 % | 1029.7 hPa | 0 | 0 |
| 1737207855 | 11.5 deg C | 53.8 % | 1029.9 hPa | 0 | 0 |
| 1737206954 | 11.2 deg C | 56.4 % | 1029.9 hPa | 0 | 0 |
| 1737206054 | 10.3 deg C | 56.6 % | 1030.2 hPa | 0 | 0 |
| 1737205684 | 10.1 deg C | 57.1 % | 1030.3 hPa | 0 | 0 |
| 1737204784 | 9.3 deg C | 59.7 % | 1030.6 hPa | 0 | 0 |
| 1737203884 | 7.5 deg C | 62.6 % | 1030.8 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)