This is the latest recevied telemetry packets stored in our database for station/object A68AN-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CabinetTemp* | CabinetHum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738343525 | 24.4 C | 48 %RH | 0 | 0 | 0 |
| 1738343422 | 24.4 C | 48 %RH | 0 | 0 | 0 |
| 1738341664 | 24.5 C | 47 %RH | 0 | 0 | 0 |
| 1738340362 | 24.5 C | 46 %RH | 0 | 0 | 0 |
| 1738339803 | 24.5 C | 46 %RH | 0 | 0 | 0 |
| 1738337944 | 24.7 C | 44 %RH | 0 | 0 | 0 |
| 1738337302 | 24.8 C | 43 %RH | 0 | 0 | 0 |
| 1738336083 | 25 C | 42 %RH | 0 | 0 | 0 |
| 1738334242 | 25.3 C | 40 %RH | 0 | 0 | 0 |
| 1738334223 | 25.3 C | 40 %RH | 0 | 0 | 0 |
| 1738332364 | 26 C | 38 %RH | 0 | 0 | 0 |
| 1738331182 | 26.5 C | 37 %RH | 0 | 0 | 0 |
| 1738330504 | 26.6 C | 36 %RH | 0 | 0 | 0 |
| 1738328644 | 27.5 C | 34 %RH | 0 | 0 | 0 |
| 1738328122 | 27.7 C | 34 %RH | 0 | 0 | 0 |
| 1738326783 | 28.4 C | 32 %RH | 0 | 0 | 0 |
| 1738325062 | 29.3 C | 30 %RH | 0 | 0 | 0 |
| 1738324925 | 29.5 C | 31 %RH | 0 | 0 | 0 |
| 1738323065 | 30.8 C | 29 %RH | 0 | 0 | 0 |
| 1738322002 | 32 C | 27 %RH | 0 | 0 | 0 |
| 1738321205 | 33.1 C | 25 %RH | 0 | 0 | 0 |
| 1738319343 | 35.1 C | 23 %RH | 0 | 0 | 0 |
| 1738318942 | 35.5 C | 22 %RH | 0 | 0 | 0 |
| 1738317484 | 35.9 C | 21 %RH | 0 | 0 | 0 |
| 1738315882 | 36.1 C | 20 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
CabinetTemp: 0, 0.1, 0
CabinetHum: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)