This is the latest recevied telemetry packets stored in our database for station/object EA5HPA-WX. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1737257359 | -27 dbm | 2.99 V | 0 | 0 | 0 |
1737256759 | -29 dbm | 3 V | 0 | 0 | 0 |
1737256159 | -29 dbm | 2.99 V | 0 | 0 | 0 |
1737255559 | -28 dbm | 3 V | 0 | 0 | 0 |
1737254959 | -27 dbm | 3 V | 0 | 0 | 0 |
1737254359 | -27 dbm | 2.99 V | 0 | 0 | 0 |
1737253759 | -27 dbm | 3 V | 0 | 0 | 0 |
1737253159 | -26 dbm | 3 V | 0 | 0 | 0 |
1737252559 | -27 dbm | 2.99 V | 0 | 0 | 0 |
1737251959 | -24 dbm | 3 V | 0 | 0 | 0 |
1737251359 | -27 dbm | 3 V | 0 | 0 | 0 |
1737250759 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737250159 | -26 dbm | 3 V | 0 | 0 | 0 |
1737249559 | -26 dbm | 3 V | 0 | 0 | 0 |
1737248959 | -24 dbm | 3 V | 0 | 0 | 0 |
1737248359 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737247759 | -25 dbm | 2.99 V | 0 | 0 | 0 |
1737247159 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737246559 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737245959 | -26 dbm | 3 V | 0 | 0 | 0 |
1737245359 | -24 dbm | 2.99 V | 0 | 0 | 0 |
1737244759 | -23 dbm | 2.99 V | 0 | 0 | 0 |
1737244159 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737243559 | -26 dbm | 2.99 V | 0 | 0 | 0 |
1737242959 | -26 dbm | 2.99 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)