APRS.ro MAP

Reset

reset

TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1737240729	17 Pkt	4 Pkt	0 Pkt	-44 dBm	1.09 V
1737240364	42 Pkt	5 Pkt	0 Pkt	-46 dBm	1.09 V
1737240000	31 Pkt	6 Pkt	1 Pkt	-44 dBm	1.23 V
1737239635	30 Pkt	3 Pkt	0 Pkt	-44 dBm	1.17 V
1737239271	7 Pkt	0 Pkt	0 Pkt	-44 dBm	1.19 V
1737239072	29 Pkt	3 Pkt	0 Pkt	-47 dBm	1.15 V
1737238707	29 Pkt	0 Pkt	0 Pkt	-46 dBm	1.11 V
1737238343	27 Pkt	4 Pkt	0 Pkt	-43 dBm	1.13 V
1737237978	27 Pkt	1 Pkt	0 Pkt	-46 dBm	1.15 V
1737237613	22 Pkt	1 Pkt	0 Pkt	-43 dBm	1.15 V
1737237249	33 Pkt	2 Pkt	1 Pkt	-44 dBm	1.07 V
1737236884	32 Pkt	3 Pkt	0 Pkt	-44 dBm	1.09 V
1737236519	8 Pkt	1 Pkt	0 Pkt	-43 dBm	1.5 V
1737236091	30 Pkt	8 Pkt	0 Pkt	-44 dBm	1.19 V
1737235726	29 Pkt	10 Pkt	0 Pkt	-44 dBm	1.13 V
1737235362	26 Pkt	14 Pkt	0 Pkt	-43 dBm	1.19 V
1737234997	26 Pkt	14 Pkt	1 Pkt	-46 dBm	1.39 V
1737234632	29 Pkt	6 Pkt	0 Pkt	-44 dBm	1.17 V
1737234268	27 Pkt	6 Pkt	0 Pkt	-43 dBm	1.13 V
1737233903	38 Pkt	9 Pkt	0 Pkt	-44 dBm	1.23 V
1737233538	40 Pkt	5 Pkt	0 Pkt	-43 dBm	1.13 V
1737233173	49 Pkt	6 Pkt	0 Pkt	-44 dBm	1.03 V
1737232808	54 Pkt	10 Pkt	0 Pkt	-44 dBm	1.07 V
1737232443	46 Pkt	6 Pkt	0 Pkt	-43 dBm	1.07 V
1737232078	30 Pkt	6 Pkt	0 Pkt	-44 dBm	1.15 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)