This is the latest recevied telemetry packets stored in our database for station/object DK1TN-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732241620 | 20.6 deg C | 33 % | 0 | 0 | 0 |
| 1732240720 | 20.6 deg C | 33 % | 0 | 0 | 0 |
| 1732239820 | 20.6 deg C | 32.8 % | 0 | 0 | 0 |
| 1732238920 | 20.6 deg C | 32.8 % | 0 | 0 | 0 |
| 1732238020 | 20.7 deg C | 32.7 % | 0 | 0 | 0 |
| 1732237120 | 20.7 deg C | 32.6 % | 0 | 0 | 0 |
| 1732236220 | 20.6 deg C | 32.5 % | 0 | 0 | 0 |
| 1732235320 | 20.6 deg C | 32.4 % | 0 | 0 | 0 |
| 1732234990 | 20.6 deg C | 32.3 % | 0 | 0 | 0 |
| 1732234090 | 20.6 deg C | 32.2 % | 0 | 0 | 0 |
| 1732233189 | 20.7 deg C | 31.8 % | 0 | 0 | 0 |
| 1732232289 | 20.8 deg C | 31.7 % | 0 | 0 | 0 |
| 1732231390 | 20.8 deg C | 31.5 % | 0 | 0 | 0 |
| 1732230489 | 20.9 deg C | 31.2 % | 0 | 0 | 0 |
| 1732229589 | 21 deg C | 30.9 % | 0 | 0 | 0 |
| 1732228689 | 21.2 deg C | 30.6 % | 0 | 0 | 0 |
| 1732227789 | 21.4 deg C | 30.1 % | 0 | 0 | 0 |
| 1732226889 | 21.8 deg C | 29.6 % | 0 | 0 | 0 |
| 1732225989 | 22.1 deg C | 29.5 % | 0 | 0 | 0 |
| 1732225089 | 22.4 deg C | 29.9 % | 0 | 0 | 0 |
| 1732224189 | 22.2 deg C | 30.4 % | 0 | 0 | 0 |
| 1732223289 | 22.1 deg C | 30.8 % | 0 | 0 | 0 |
| 1732222956 | 22 deg C | 31.1 % | 0 | 0 | 0 |
| 1732222055 | 21.9 deg C | 31.3 % | 0 | 0 | 0 |
| 1732221155 | 21.7 deg C | 31.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)