APRS.ro MAP

Reset

reset

CT4TX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CT4TX-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1737222828	150 Pkt	-45 dBm	8.24 V
1737220997	5 Pkt	-45 dBm	8.26 V
1737219665	147 Pkt	-41 dBm	8.22 V
1737217833	150 Pkt	-42 dBm	8.26 V
1737216001	145 Pkt	-43 dBm	8.24 V
1737214168	4 Pkt	-44 dBm	8.26 V
1737212261	166 Pkt	-42 dBm	8.26 V
1737210429	170 Pkt	-39 dBm	8.22 V
1737208593	158 Pkt	-40 dBm	8.22 V
1737206762	158 Pkt	-39 dBm	8.24 V
1737204928	174 Pkt	-39 dBm	8.24 V
1737203097	162 Pkt	-39 dBm	8.24 V
1737201265	183 Pkt	-39 dBm	8.26 V
1737199433	172 Pkt	-39 dBm	8.24 V
1737197601	152 Pkt	-39 dBm	8.22 V
1737195769	148 Pkt	-39 dBm	8.2 V
1737193938	151 Pkt	-39 dBm	8.22 V
1737192103	124 Pkt	-38 dBm	8.26 V
1737190274	121 Pkt	-39 dBm	8.26 V
1737188444	130 Pkt	-41 dBm	8.24 V
1737186614	113 Pkt	-41 dBm	8.24 V
1737184784	2 Pkt	-40 dBm	8.22 V
1737180923	126 Pkt	-39 dBm	8.26 V
1737179093	127 Pkt	-53 dBm	8.26 V
1737177264	121 Pkt	-51 dBm	8.24 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)